KX-EJP-030-2500
Ejector pin DIN 1530 A Ø3 x 250
Verified — DIN 1530 A + 8 independent sources
| ✓ | form | standard + 2 corroborating source(s) |
| ✓ | head geometry | standard + 1 corroborating source(s) |
| ✓ | Length availability | standard + 1 corroborating source(s) |
| ✓ | Material & hardness | standard + 2 corroborating source(s) |
| ✓ | tolerance shank | standard + 2 corroborating source(s) |
Every figure on this page traces to a standard or to sources that agree independently. How we verify: Data & quality.
Dimensions
≈ DIN 1530 A Mat. ≈ 1.2210 / 1.251658–62 HRC through-hardened
| Sym | Dimension | Nominal | Tolerance |
|---|---|---|---|
| d1 | Shank diameter d1 | 3 mm | g6−0.002 / −0.008 |
| l1 | Overall length l1 | 250 mm | — |
| d2 | Head diameter d2 | 6 mm | — |
| k | Head thickness k | 3 mm | — |
| r | Transition radius r | 0.3 mm | — |
Select a size
2 matchingOr ask for a size nobody stocks
Type any length. Off-catalogue sizes are generated on demand, not refused.
Specification
| Standard | DIN 1530 A |
| Form | A |
| Material | Alloyed cold worked steel, through-hardened ≈ 1.2210 / 1.2516 |
| Shaft hardness | 58–62 HRC |
| Surface | through-hardened |
| Unit | Nos |
Compatibility
| DME | EA/3 | Compatible with |
| HASCO | Z40/3x250 | Compatible with |
| Meusburger | E1710/3x250 | Compatible with |
The trade marks and article designations named here are the property of DME / HASCO / Meusburger. They are used solely to indicate the intended purpose of our products. There is no commercial connection between us and the proprietors of those marks, and our products are neither manufactured, licensed nor approved by them.
3D preview
drag to rotateGenerating preview…
Face colour key
- fitPrecision fit — ream or grind to the stated ISO fit
- clearanceClearance — drilled is sufficient
- seatingAxial seating face — flatness and squareness apply
- functionalFunctional surface — no mating requirement
- neutralNo manufacturing requirement stated
These colours are carried on the faces of the STEP AP242 file and in the 3D preview above, so a CAM system reads the same instruction the drawing would carry.
CAD download
Preparing…
Need a different length? Any length is generated on request — pins are supplied over-length and cut to fit, so a custom size is routine.
Price & availability
| from 10 pcs | 6,93 € |
| from 25 pcs | 6,64 € |
| from 50 pcs | 6,35 € |
| from 100 pcs | 5,99 € |
Prices net, ex works. Carriage free from 150 €.